05:55 PM 10 Oct, 2020
3 effective ways to remove dents without painting the car
Even the most careful car owner may encounter defects on the car body. A dent can appear on the door, hood, and just about anywhere.Often the driver finds a dent confuses, because he cannot remember from what the defect could have appeared. Anything can be the reason. A ball that accidentally flew in while children were playing in the yard, objects hit, a piece of ice or snow fell in winter, even traces of a large hail.
Without painting today, the most popular ways to correct such a defect can be considered vacuum dent removal, a chemical applicator and a lever. Each of these methods has its own characteristics, pros and cons. The main thing to remember in such a situation is that you should not try to get rid of the dent yourself. So you can only further damage the body and aggravate the situation. You need to seek help from professionals.
1. Vacuum drawing
Today it is one of the most effective and common options. The procedure is that the dent is pulled out with a strong vacuum. At first glance, this approach may seem a little strange, but in fact it has proven to be effective.
Before using a vacuum, the surface is thoroughly cleaned and degreased. After that, a vacuum suction cup is installed. After fixing, the suction cup moves in different directions. This method is most suitable for removing even and large dents. Most often used to remove defects in the area of the door, hood or roof.
2. Removing dents with levers
This procedure is more complex than vacuum. Therefore, it is necessary to seek help only from experienced professionals. Dent removal is carried out from the inside. All body parts that interfere must be removed in advance. Specialists select the lever of the desired size and length. After that, pressure is applied to the dent to level it. This method is not suitable for use in places where there was straightening. It is important to remember that this method requires serious knowledge and experience.
3. Pulling applicator
With this approach, a special chemical applicator is used. This method is most often used when there is no physical possibility to gain access to the damaged area.
The damaged area must be cleaned and degreased. After that, chemical applicators are glued to the right place. For such purposes, a special hot glue is used. Next, with the help of a mini-lifter, the dent is corrected. After the work is done, the adhesive is removed from the surface.
Leave a comment